 GENERAL LABOR
|
Positions Available
|
GENERAL LABOR
|
|
3111 3111 COMPRESSOR TECH--MILWAUKEE AREA 1 position needed - Milwaukee area. This company is seeking a temp to hire candidate for their Compressor Technician position. They have a total of 4 locations and 30 employees! They will be training you to repair and service compressors and dryers for their clients in the Milwaukee area. You will not be bored as you travel to different sites throughout the week to monitor, service, and evaluate equipment. After evaluating, you may need to offer solutions and options for them to save money in the future. You will also need to write up service orders. They offer great training to help start your new career! This company is a leader in the industry! Qualifications: Must have good mechanical skills and have basic tools. (They will supply the rest of the tools.) This position also requires a good driving record as you will be using a company vehicle to get to job sites. We will be asked to verify your driving record. At times, you may even be able to take this vehicle home! Must have excellent initiative and desire to want to learn new things. Good work references, attendance and attitude are required. Occasionally, you may be asked to stay overnight if working further away. Some lifting and steel toes required. Drug test may be required if they implement new policy in 2007. First shift - Approximately 7am-3:30pm with occasional overtime. (Every 4 weeks, you will be on-call for that week's nights and weekends. They are evaluating the on call basis right now, so this may change a bit.) Pay: Approximately $12-15.00/hour depending on your mechanical skills. (Benefits offered when hired: Health, Dental, 401k, Cafeteria Plan, etc.) 3103 3103 NYLON SEWING/LIGHT FABRICATING--Appleton This Appleton company creates a lot of slings and hoists that are used to move larger items/products. They are seeking a temp to hire person to help learn to sew these large hoists. This is a friendly and good company to work for! 1. Accountable for sewing/fabricating nylon slings and assemblies so that products are made for quality. Review the work order, check the blueprint, measure and cut material that is needed, sew the slings together, inspect and wrap products, and oversee accuracy. 2. Responsible for routine maintenance of sewing machinery (Will train) 3. Use safety procedures and occasionally work overtime 4. Keep area clean and neat 5. Assist in other duties as needed. Qualifications: HS graduate or equivalency Previous sewing or assembly experience is strongly preferred. Must be able to read a tape measure and follow instructions Must be able to learn to read blueprints and follow drawings Must have steel toes and be able to lift 25-50 pounds bend, and stand on concrete. Candidate will constantly use hand/wrist functions in sewing Hours: 7:30-4:00pm, 4:30 (1/2 hour lunch) Pay: 10.00-13.00/hour (benefits offered if hired on after 460 hours.) 3099 3099-ENTRY LEVEL SIGN MAKER-Appleton This is a temp to hire for a friendly, smaller company in Appleton. It is an entry level position where candidate will be helping to make signs, cleaning of the tables/shop, and other duties that are needed. It does not involve a lot of lifting. This is entry level to start with so they are willing to train. Great, family owned environment! Some possible delivery may be needed as well so you must have a good driving record Qualifications: Person must be good with their hands. Strong work ethic and attendance are required. Good driving record is required. Pay: $10.00 (benefits offered once being hired on.) Possible review after 90 days! Hours: 8:00-4:30pm (1/2 hour lunch) 3087 3087 CHECK OUT PERSON- Appleton This busy Appleton Company is in need of a temp to hire check-out person. The candidate would be installing accessories on trucks. He or she will also be doing paint touch-ups, decals, wash/detailing and other duties as needed. Qualifications: Person would need to supply their own basic tools and have good mechanical aptitude! Good attendance and work ethic required. Automotive/Truck industry helpful, but not required. Hours YOU can choose: 7:00am to 3:30pm M-F, or 6:00am to 2:30pm M-Fpm, or 6:00am to 4:30pm M-TH. However, after being hired on, your schedule may be set at 6am-3:30 or 4:30pm. Some overtime required. Pay: Approximately $12.00 Benefits: health, dental, life, 401K - Most benefits start 30 days after being hired on. EXCEPT 401K, that starts after 1 year. 2975 2975 ELECTROMECHANICAL ASSEMBLY--Appleton This 140 employee company is looking for employees for their Appleton location. They have openings on second and third shifts! PRIMARY DUTIES These positions are long term temporary... no end date set. 1) Applies electronic theory and mechanical ability to layout, build, test, troubleshoot, repair and modify equipment. 2) Assembles components, subassemblies, and systems according to engineering drawings. Positions and aligns parts in specified relationship to each other. Mounts assembled components and attaches functional and cosmetic hardware. 3) Diagnoses malfunctioning electrical and mechanical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves. Ensures proper operation and alignment of mechanical components such as belts, air cylinders, indexing units, and drums. 4) Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures. Verifies conformance of parts to stock list and engineering drawings using measuring instruments such as calipers, gauges, and micrometers. Verifies alignment and tolerances of moving parts. 5) Uses MIS system to enter time spent working on assemblies/subassemblies. Complete all paperwork. 6) Coordinate with engineering to ensure Engineering Change Requests are submitted. EXP: Must have 2 years exp or appropriate education. QUALIFICATIONS REQUIRED: This position requires an associate's degree in electro-mechanical technology or a Maintenance Certificate and/or equivalent experience or training. Must be computer literate and capable of reading engineering drawings. Set up and operate a variety of power tools such as drill press, bandsaw and stud welder. Must have tools required to perform daily routine. Pay: $15.46-19.00/hr Hours: Second shift in Assembly is four 10-hour days; Monday through Thursday, 2:25 p.m. to 12:55 p.m. with ½ hour unpaid lunch. Third shift works five days a week, starting on Sunday night at 10:50 p.m. and goes to 6:05 a.m. (which is less than 8 hours). Temp employees can start earlier or leave later than our typical 3rd shift hours, so the temps get a full 8 hours worked. They need to take a lunch break, unpaid, as well. 3073 3073 (2) DAY SHIFT MIG WELDERS-BONUS OFFERED! **April bonus! If you interview and start this position in April 2008, you will be eligible for a bonus! Possible $400.00 bonus offered to those who complete 460 hours with good attendance and work ethic. This company is seeking 2 temp to hire welders. It is a temp to hire position, however, the company may consider buying out the contract after 45 days. The company is seeking a person to fabricate/weld/install hydraulic truck mounted equipment. (This company does mostly custom welding, rather than production line welding.) This is an excellent company and atmosphere! Many Career Options employees have been hired on at this company and they enjoy working at this company a lot! Qualifications: Mechanical skills and blueprint reading skills are greatly desired. Must have a minimum of 2-3 years of "MIG welding (custom welding needed rather than production line welding) Drug test required before first day! Hours: YOU can choose: 7:00am to 3:30pm M-F, or 6:00am to 2:30pm M-Fpm, or 6:00am to 4:30pm M-TH. However, after being hired on, your schedule will be set at 6am-3:30 or 4:30pm. Some overtime required. Pay: $15.00/hour - Benefits: health, dental, life, 401K - Most benefits start 30 days after being hired on. EXCEPT 401K, that starts after 1 year. Complete combination wrench set from (3/8" to 1") Crescent (adjustable) wrenches Complete screwdriver set Medium and large ball peen hammers Pliers Side cutters Needle nose pliers Vise grip pliers 3/8" drive socket set from 3/8" to 7/8" 3/8" drive socket wrench, and extensions ½" drive socket set 3/8" to 1" ½" drive socket wrench, and extensions. Tool chest on wheels 3072 3072-WELDERS-DAY SHIFT WITH TRAINING ! BONUS OFFERED! **April bonus! If you interview and start this position in April 2008, you will be eligible for a bonus! Possible $400.00 bonus offered to those who complete 460 hours with good attendance and work ethic. This company is seeking 2-3 temp to hire welders. It is a temp to hire position, however, the company may consider buying out the contract after 45 days. The company is seeking a person to fabricate/weld/install hydraulic truck mounted equipment. (This company does mostly custom welding, rather than production line welding.) This is an excellent company and atmosphere! Many Career Options employees have been hired on at this company and they enjoy working at this company a lot! Qualifications: This company will consider those who have completed welding courses from the Technical college or those who have no schooling but some welding experience. (MIG or stick welding preferred but not required.) Mechanical skills and blueprint reading skills are preferred. Candidates must have excellent attendance records and strong work ethic. Candidates also must be able to bend, twist, lay down, etc while welding. (this is not a position where you will be sitting down at a bench and welding.) Drug test required before first day as well as basic tools. Hours: YOU can choose: 7:00am to 3:30pm M-F, or 6:00am to 2:30pm M-Fpm, or 6:00am to 4:30pm M-TH. However, after being hired on, your schedule will be set at 6am-3:30 or 4:30pm. Some overtime required. Pay: $13-14.00/hour - Benefits: health, dental, life, 401K - Most benefits start 30 days after being hired on. EXCEPT 401K, that starts after 1 year. 6/2006...Minimum Tool List for Welder/Fabricator See below: Complete combination wrench set from (3/8" to 1") Crescent (adjustable) wrenches Complete screwdriver set Medium and large ball peen hammers Pliers Side cutters Needle nose pliers Vise grip pliers 3/8" drive socket set from 3/8" to 7/8" 3/8" drive socket wrench, and extensions ½" drive socket set 3/8" to 1" ½" drive socket wrench, and extensions. Tool chest on wheels 3071 3071 OPERATIONS ASSISTANT- Appleton This is a long-term temp position for a company in N. Appleton. It is a medium sized company with 140 employees. The company is looking for a full time Operations Assistant. The candidate will mostly be responsible for the following duties: Develop, update and post charts and/or graphs to track department and company metrics. Updates information and charts for Defect Tracking System. Assist the Facilities Manager with OSHA requirements. This includes processing and maintaining Material Safety Data Sheets, tracking personal protective equipment issued to employees, etc. Assists in the safety training record keeping, and other related functions, to ensure compliance with OSHA. Assist the Operations group in developing and updating procedures (in flow format), policies and standard work. Create quality documentation folders for each machine in the production schedule. Print out machine wire number labels and lamacoids prior to assembly of each machine. Plot new prints for all machinery, in preparation for shipment. Processes machine documentation to close out machine production process. This includes: organizing and filing materials in white baskets; closing any open production receipts and work orders; and other related activities. Perform administrative duties, including typing and data entry to create reports and presentations. Assist OPC with administrative processes such as creating shop orders and expediting parts. Visibly support "lean" and other process improvement activities. Participate in rapid improvement events. Applies continuous improvement practices to one's job. Support transition activities, as required. Maintain an open mind throughout the change process. Works with others to continuously fuel improvement throughout the Company. Contribute to core competencies of Market Intelligence and Product Development by gathering and reporting all relevant information. This includes: customer needs/wants/activities; and competitive information. Performs other appropriate duties as required or requested by supervisor. Qualifications: A High School diploma and a minimum of two years previous administrative support experience, or equivalent training and experience. Must have excellent communication and interpersonal skills, and a strong working knowledge of Microsoft Word, Excel and Power Point. Must be very detail-oriented and organized, and have ability to develop a strong rapport with co-workers. Must have professional demeanor and be capable of working in a fast-paced environment. Requires ability to work (at times) with interruptions, large volumes of information and changes in requirements. Position requires flexibility in work schedule to meet deadlines. Previous experience with Material Requirement Planning (MRP) System strongly preferred. Hours: first shift 8:00 - 5:00 or 7:00 - 4:00 pm (if you wanted to take a half hour lunch and leave earlier that would be fine) Pay: $13 - $15 per hour, depending on experience and abilities. 3050 3050 MACHINIST TO TRAIN ON BORING BAR-BONUS OFFERED! **Possible $250.00 bonus offered if employee has excellent attendance, quality and work ethic after 30 days.** This direct hire position is for a Neenah machine shop of 25 employees. This is a family owned company, started in 1937! They do general machine work, building, repairing and welding. This company has a great deal of variety and diverse projects - you won't be bored in this role! Qualifications: Must have 3-5 years of machining experience (preference to those with manual, although will consider CNC as well) and must be very detailed orientated! They will train on the boring bar if needed. Hours: 7-4:30pm, with some Saturdays. Pay: $18-22.00/hour - (Potential to make $55,000 with a 45 hour week. If more than 45 hours, you could earn up to $60k!) They offer health, flex spending, life, and generous profit sharing benefits. 3026 3026-FACTORY ACCEPTANCE TESTING-Appleton This company is seeking 5 temporary employees to work 4 weeks between April and May. You will measure the seals, hems and other parts to the bags and record the measurements. They are testing the machines to make sure they are producing the correct sized bags. You may be doing some other light labor work to replace down time from the machines. Qualifications: You need to have good measuring skills (be able to read a ruler) and be able to stand for long periods of time. Manufacturing experience is strongly preferred. They require steel toe shoes but if you don't have them, they have steel covers for your tennis shoes. They provide regular safety glasses but if you wear glasses, they prefer that you bring your own prescription safety glasses. Drug testing is required before first day! The pay is $9.00/hour. They are putting an "incentive plan" into effect for the Measurer positions. After a Measurer has worked for 300 straight-time hours in this role, they will receive a $0.75 per hour increase (to $9.75 per hour). After a Measurer has worked for 600 straight-time hours in this role, they will receive another $0.75 per hour increase (to $10.50 per hour). First shift: Approximately 8am-5pm (some OT may be required.) 3041 3041 - MACHINIST- Hortonville **April bonus! If you interview and start this position in April 2008, you will be eligible for a bonus! Possible $200.00 bonus offered to those who complete 460 hours with good attendance and work ethic. This small company in Hortonville is offering a great opportunity for an experienced manual machinist. Candidate will learn to operate CNC Turning Centers, CNC Vertical Machining Center, Manual Lathes and Bridgeport style Mills. They have 13 employees who are cross trained in several areas, so candidate must be willing to assist in a variety of duties. This is a temp to hire. (Tools are provided) Qualifications: Strong attention to detail, strong mechanical skills, and manufacturing experience is needed for this opportunity. Candidate MUST have Machine Shop experience and have a general knowledge of lathes and mills. Candidate must have exp. with calipers, micrometers, etc. Some lifting required and excellent work ethic is needed. Pay: $20-$22/hour for the right candidate. Once hired, they have an excellent health care package, 401k, holidays, etc. Hours: Approximate hours of 7:00-3:00 pm 2900 2900 ASSEMBLY - WAXING DEPT.-Neenah This company is seeking 2 temp to hire candidates for production. This candidate will be cutting and gluing parts onto models and waxing frameworks for the dental profession. This is a sit down, hands on and crafty position. Qualification: Great personality, good attendance record and good hand/eye coordination. Pay: $8.50/hour (raise to $9.00 when hired.) Possible bonus of $100.00 every six months. Hours: All shifts needed! Benefits: Full benefit package once hired on. (Health and life insurance, paid holidays and vacation days plus a perfect attendance bonus) 3016 3016-MANUFACTURING ENGINEER-Oshkosh This premier manufacturing company located in Northeastern WI in the Fox River Valley has a direct hire opportunity for the position of Manufacturing Engineer. This individual will work closely with manufacturing in order to create programs, fixtures and select tooling to produce quality parts. Duties and responsibilities: include participating in the initial phase of new product lines, developing equitable standards, estimating costs of machining and assembly of new parts; and measuring the performance against standards. The person must be able to write operating instructions or programs. This is a hands on job where you will have contact with all manufacturing functions. The qualified candidate will have experience with Virtual Gibbs, and Auto Cad Software. A graduate in mechanical/Industrial engineering or A.A.S. degree with Mechanical Technology Major or equivalent experience in applicable field is required. A minimum of four years of relevant, with at least two years of experience in Industrial Engineering is desired. Additional plus qualifications include: knowledge of lean manufacturing, horizontal and vertical machining experience and a working knowledge of the following controls: Fanuc, Vickers and OKK Neomatic. Hours: First shift Salary: $60K-70K Benefits include Life, Health, Dental, paid holidays and vacation and a clean and professional work environment. 3009 3009 - CNC MACHINIST (2nd Shift) **April bonus! If you interview and start this position in April 2008, you will be eligible for a bonus! Possible $200.00 bonus offered to those who complete 460 hours with good attendance and work ethic. This company is a leader in the machine tool industry and is seeking a temp to hire CNC Machinist. The primary duties and responsibilities include, but are not limited to the following: 1. Program, setup and operate the machining center to perform various machining operations. 2. Process and program parts efficiently to minimize secondary operations, establish consistency of quality control, create and maintain documentation for programs, setup sheets and tooling sheets. 3. Set up tools, when necessary, and load tools. 4. Establish first piece by inspecting 100% before going into production run. 5. Copy programs onto discs for backup, update engineering changes when necessary, and keep current listing of programs and part numbers with their disc identification. 6. Program, setup, document and run other parts production whenever possible. 7. Read and understand blueprints, use various measuring instruments and have a good working knowledge of math. Qualifications: Ideal candidates will have experience running machining centers; programming capabilities and be able to set-up and check their own parts. Hours: 4 days per week (10 hours per day, second shift hours. They can be a little flexible with these hours!) Pay- Maximum per hour $18.50 (Once hired on, this company offers a complete benefit package including medical, dental, life insurance and a 401k Investment program.) 3008 3008 CNC MACHINIST (Weekend hours) - Oshkosh This company is a leader in the machine tool industry and is seeking a temp to hire CNC Machinist. The primary duties and responsibilities include, but are not limited to the following: 1. Program, setup and operate the machining center to perform various machining operations. 2. Process and program parts efficiently to minimize secondary operations, establish consistency of quality control, create and maintain documentation for programs, setup sheets and tooling sheets. 3. Set up tools, when necessary, and load tools. 4. Establish first piece by inspecting 100% before going into production run. 5. Copy programs onto discs for backup, update engineering changes when necessary, and keep current listing of programs and part numbers with their disc identification. 6. Program, setup, document and run other parts internal to ongoing production whenever possible. 7. Read and understand blueprints, use various measuring instruments have a good working knowledge of math. QUALIFICATIONS: 1. Prior CNC experience a necessity. Previously attained “identifiable qualifications” gained trough technical school or other on-the-job training are considered beneficial qualities. 2. Read and understand blueprints, use various measuring instruments and have a good working knowledge of math. 3. High degree of attention and care required to prevent damage to complex machine tools. 4. High degree of attention and care required to prevent injury to self and others when operating machine tools. 5. Requires varying degree of working precision tolerances where amount of damage can be considerable. 6. Required to stand while performing job. 7. May be required to lift 10-40 lbs. frequently and over 50 lbs. occasionally. Hours: Friday, Saturday and Sunday shift from 4pm to 4 am each day. Pay- Maximum per hour $18.50 plus an additional $1.00 for night shift differential. (Once hired on, this company offers a complete benefit package including medical, dental, life insurance and a 401k Investment program.) 2991 2991 MECHANICAL ASSEMBLERS B-Appleton This company in Appleton of 140 employees is looking for mechanical assemblers on second and third shifts! They are the high-quality, high-tech, high-service-level provider of equipment in their industry and have great co-workers with good working conditions! DUTIES: These positions are long term temporary... no end date set. They have openings on second and third shift. You MUST have worked a second or third shift position before! 1)Applies mechanical ability and mechanical testing procedures to layout, build, test, troubleshoot, repair and modify machinery. 2)Fits and assembles components according to engineering drawings. 3)Diagnoses and replaces damaged or malfunctioning parts. 4)Verifies conformance of parts to stock list and engineering drawings using measuring instruments such as calipers, gauges, and micrometers. 5)Uses MIS system to enter time spent working on assemblies/subassemblies. 6)Coordinate with engineering to ensure Engineering Change QUALIFICATIONS REQUIRED This position requires completion of a vocational diploma in mechanics or equivalent training, and/or one to two years experience in machine assembly or similar field. Must be computer literate and capable of reading engineering drawings. Set up and operate a variety of power tools such as drill press, bandsaw and stud welder. Must have tools required to perform daily routine. Any interested candidates MUST have already worked a third shift at a current or previous company. Drug test required before first day. Pay: $13.75-16.75/hr Second shift: four 10-hour days; Monday through Thursday, 2:25 p.m. to 12:55 p.m. (This time includes ½ hour for an unpaid lunch). Third: five 8-hour days, Sunday night through Friday morning, 10:50 p.m. to 6:05 a.m. 15-30 minute unpaid lunch. Candidates can work additional hours before or after the shift to make up an 8 hour shift. Employees Must have the following tools: MECHANICAL ASSEMBLER TOOL LIST (updated 1/22/06...) Wrench Set, combination 1/4" - 1" and 5mm - 19mm Socket Set, 1/4" 3/8", 1/2" Drive Screwdriver Set Needle Nose Pliers Channel Lock Pliers Side Cutters Metric and Standard Ball Drivers T-Handle Allen Wrenches Brass Hammer Dead Blow Hammer, 3 pound Ball Peen Hammer Automatic Center Punch Tape Measure, 12 ft. Pry Bar Vice Grip Pliers Torpedo Level, with Magnet Combination Square Ratcheting Tap Handle, small and large Files coarse and fine Deburring Tool Extension Cord, 25 ft. Utility Knife Drill Index Tie Strap Gun 2988 2988 2or3 WELDERS-Reedsville $200.00 POSSIBLE BONUS AFTER 30 DAYS OF EMPLOYMENT ON THIS POSITION. GOOD ATTENDANCE AND WORK ETHIC ARE REQUIRED! This is a temp-to-hire position for welders for a manufacturing company. This company is located in Reedsville (20 minutes from DePere and Kaukauna). They will be doing MIG and some TIG welding on carbon steel and some stainless steel and aluminum. Candidates will be cutting, trimming, and fitting pre-formed components and welding them together. They will install tank on truck chassis, drill holes, and weld on mounts. They will install power take off on to truck transmission - run air and electrical lines; install and hook up running lights for trucks; and install valves and plumbing for vacuum and waste. They will also relocate some truck components to allow for mounting vacuum equipment. Qualifications: Previous experience in welding a must. (They are open to training candidates if they have minimal welding experience). Candidate must be able to lift 100 lbs. They supply uniforms and power tools. Steel-toed boots needed. Candidate must have basic tool set such as screwdrivers, wrenches, etc. Pay: $15-20.00 depending on experience. Hours: 1st shift M-F 7-5, but they are flexible. Benefits once hired on: 100% paid health, IRA, paid vacation & holidays (no dental) 2974 2974 ELECTRICAL ASSEMBLER-Appleton This company in Appleton of 140 employees is looking for electrical assemblers on second and third shifts! They are the high-quality, high-tech, high-service-level provider of equipment in their industry and have great co-workers with good working conditions! These positions are on second and third shift and are long term temporary (no set end date). You MUST have worked a second or third shift position before! Requirements: Must have assoc. degree in electro mechanical technology or equivalent experience. Must be computer literate and capable of reading engineering drawings. Set up and operate power tools such as drill press, band saw and stud welder. Must have their OWN tools to perform the daily routine. GENERAL CHARACTERISTICS:Possesses knowledge or Electrical Theory and usage of N.E.C. in the assembly of machines with AC and DC circuits using engineering drawings. Must be a team player who is quality oriented. Ability to coordinate with engineering, and make changes as required to update print package. PRIMARY DUTIES 1) Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electronic equipment. 2) Assembles electronic components, subassemblies, and systems according to engineering drawings. 3) Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. 4) Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures. 5) Uses MIS system to enter time spent working on assemblies/subassemblies Pay: $14.57-17.75/hr 2nd shift – four 10-hour days; Monday through Thursday, 2:25 p.m. to 12:55 p.m. (This time includes ½ hour for an unpaid lunch). 3rd shift – five 8-hour days: Monday through Friday (actually Sunday night through Thursday night), 10:50 p.m. to 6:05 a.m. (This time includes 15 minutes for a paid lunch for our regular hires; Temporary employees are NOT paid for that 15 minutes, so they can take 15 minutes to 30 minutes for lunch, but it is unpaid. They can also extend their hours to get a full 8 hours of working time each day.) *****Please note the following tools ARE required: ELECTRICAL ASSEMBLER TOOL LIST (updated 1/22/06) Wrench Set, Combination 1/4" - 1" and 5mm -19mm Socket Set, 1/4" 3/8" Drive Screwdriver Set Wire Stripper / Crimper Needle Nose Pliers Channel Lock Pliers Side Cutters Metric and Standard Ball Drivers Automatic Center Punch Tape Measure, 12 ft. Torpedo Level, with Magnet Combination Square Ratcheting Tap Handle, small Files, coarse and fine Deburring Tool Extension Cord, 25 ft. Soldering Iron, approx. 25 Watt Screw Starter X-Acto Knife Handle, #11 Blade Utility Knife Multimeter Static Wrist Strap Drill Index Precision Screwdriver Set - 1/8" and smaller Tie Strap Gun Micro-torch |